STAT read alternatives: 5 numbers to demand in 2026

Replacing a vendor on STAT reads? Compare alternatives on five published numbers: median STAT turnaround, SLA compliance, final-read policy, escalation.

Published 10 November 2026

Two in the morning. The ED attending has a head CT on a patient who may or may not be bleeding, the study left your PACS some time ago, and the worklist still shows it unread. She calls the vendor's operations line and someone says they will check. Nobody can tell her how long this normally takes, because the vendor has never published a number anyone can hold it to. That call, repeated a handful of times over a quarter, is what starts most searches for a teleradiology alternative for STAT reads. Speed is the presenting complaint. The underlying problem is measurement: your incumbent sells you an adjective, so there is nothing to enforce when the adjective stops being true.

This page is for the person who has to make that switch defensible to a medical executive committee. It covers the five numbers that separate STAT teleradiology providers from each other, what the big networks actually publish about emergency turnaround as of August 2026, why a preliminary STAT read moves work onto your morning list, and how to run a 30-day pilot that produces evidence instead of a hunch.

Why do buyers replace a vendor on STAT reads first?

Because STAT is where a service failure becomes a clinical event. Routine turnaround slipping by a day annoys a scheduler. A STAT head CT sitting unread while an ED physician holds a stroke decision generates an incident report, a phone call to the chair, and a line item in the next quality meeting. That asymmetry is why emergency turnaround, and not routine volume, triggers the search.

STAT is also the smallest slice of volume you can move without renegotiating anything. It is a defined priority class, it is easy to route separately, and it sits inside most exclusivity carve-outs. So the buyer who wants leverage in a renewal conversation moves STAT first and keeps everything else where it is.

The third reason is that STAT is the only tier where the failure is visible in real time. Nobody notices a routine chest X-ray returning in 19 hours instead of 11. Everybody notices a trauma CT that has not come back. Complaint traffic concentrates on STAT, which means STAT is where you have documented evidence and internal political cover to make a change.

One caution before you act on any of that. Emergency turnaround complaints are sometimes a queueing problem in disguise: in any reading operation with a single worklist, emergent protocols take priority, so the delay you notice on STAT may actually be your routine work backing up into the same overnight window. Diagnose which one you have before you shop, because they call for different fixes and different vendors.

Five numbers that separate STAT teleradiology alternatives

Five figures sort the field, and every one of them is either published, contractible, or absent. Ask for all five in the same written request, at the same time, from every vendor including your incumbent. What comes back tells you more about how a vendor governs its own performance data than any reference call will.

Number to demand What a usable answer looks like What a dodge looks like
Median STAT turnaround A figure in minutes with a named clock start event and a named stop event "Fast", "industry-leading", or a number with no clock attached
90th percentile STAT turnaround A second figure on the identical clock, disclosed alongside the median Only an average, which hides the tail where your complaints live
Trailing SLA compliance A percentage of STAT studies inside the tier over a stated window "We meet our SLAs", or performance disclosed only after you sign
Final signed report share The percentage of STAT studies returned as the report of record Silence, or "prelims and finals both available" with no split
Critical result callback Minutes from signature to verbal contact, plus who dials and who escalates "We call you", with no time, no owner, and no escalation path

The clock start event is the one that gets skipped, and it is the one that changes the number most. A vendor measuring from the moment a radiologist opens the study will publish a faster figure than a vendor measuring from last-image arrival, and the difference is the queue, which is exactly the part you are buying. AstraRad measures from last-image arrival to radiologist signature and puts that definition on the same SLA page as its contractual tiers.

The percentile matters for a separate reason. Medians are stable and averages are fragile, but neither describes the night your volume tripled. Ask for the 90th percentile on the same clock and you learn what the worst decile of your STAT experience looks like, which is the decile that generates the phone calls. Our guide to verifying teleradiology vendor claims walks through how to test a published figure before it reaches a contract.

What the big networks publish about emergency turnaround

What is published is measured in different ways. Below, listed alphabetically, is what five providers stated on their own public pages when we checked them on 10 August 2026, with a link to each source. Where we did not find a statement on the linked page, the cell says so rather than guessing.

Provider Published emergency turnaround (checked 10 August 2026) Clock start stated Report status Trailing compliance rate Stated strength
ONRAD / Direct Radiology No numeric figure on that page; turnaround described as customizable per customer (source) Not stated on that page, Aug 2026 Mostly final reads, preliminary reports offered as an option Not stated on that page, Aug 2026 States that final reports save the client re-read time
Real Radiology No numeric figure on that page (source) Not stated on that page, Aug 2026 Not stated on that page, Aug 2026 Not stated on that page, Aug 2026 Publishes Delegated Credentialing Agreements as the mechanism that accelerates privileging
StatRad No numeric figure; "every exam is treated as a STAT exam" (source) Not applicable Preliminary or final, buyer's choice Reported to clients in a portal, per that page Per-client turnaround reporting in a portal, plus a published certification stack
USARAD "20 min or less" average for STAT cases (homepage); "30-60 MINS" average for hospital ER cases (services page) Yes, on the services page: from receipt of the study request and images Final reports Not stated on that page, Aug 2026 States when its turnaround clock starts
vRad Stroke protocol under 7 minutes on average, trauma protocol under 12 minutes on average (source) Not stated on that page, Aug 2026 Preliminary and final; finals stated as over 80% of study volume (source) Not stated on that page, Aug 2026 Detailed published stroke and trauma protocol data, with volumes

AstraRad, the publisher of this page, states its own terms separately so it is not scored against the providers above: STAT under 4 hours, with 2-hour and 1-hour STAT on request at a higher multiplier; stroke protocol committed at under 30 minutes; routine 24 to 48 hours; all contractual and measured from last-image arrival to radiologist signature (SLA tiers and methodology); a final signed report on every study; trailing compliance rate not yet published.

Every "Not stated" cell describes the page linked beside it on that date and carries no implication about performance: a vendor may measure something carefully and report it to clients directly.

One observation. A protocol average is a genuinely useful number that answers a different question than a tier commitment. vRad's stroke and trauma figures are specific, published emergent data; they describe those protocols, so ask any vendor separately about the tier that covers the rest of your STAT volume.

So when you compare, compare the tier you are actually buying, on the clock you actually care about. Our longer breakdown of vRad alternatives runs this same axis-by-axis comparison across the national networks, and the field-wide version of the exercise is in our guide to switching teleradiology providers.

A preliminary STAT read buys you a second read in the morning

A preliminary read is a non-final interpretation your ED can act on immediately, and it never closes the study. Somebody at your facility interprets those images again and signs the report of record. That second interpretation is real work at your loaded internal rate, and it never appears on the vendor invoice, which is why prelim-heavy contracts survive budget reviews that would kill them if the morning hours were priced.

Follow one overnight study through the building and the cost becomes legible. The images arrive, the vendor returns an unsigned interpretation, and your ED physician acts on it, which is the whole point of the preliminary tier and is clinically appropriate. At 8am the study lands on your own radiologist's list because a preliminary cannot serve as the report of record. Your radiologist re-reads the images, dictates the final, and signs it, which takes the same reading time the vendor already billed you for. When the two interpretations disagree, someone places a call to the treating clinician, writes an addendum, and documents the variance for quality review. Each of those steps is short. Multiplied by every preliminary in a year, they add up to a second radiology department running in parallel with the one you already pay for, staffed by the people you most need reading new work. The published evidence on how often that variance is clinically meaningful is thin outside academic settings, but a 2025 meta-analysis in Academic Radiology pooled 20 studies covering 616,918 on-call preliminary reports and found major discrepancy rates of 1.35% for CT and 1.86% for MRI against the attending final. Those figures describe resident call, so they are not a vendor benchmark. They do describe the size of the reconciliation problem any preliminary tier creates, and they explain why the ACR treats a significant variance between a preliminary and a final interpretation as something that has to be communicated rather than quietly corrected.

Vendors split on this. vRad publishes that final reports account for over 80% of its total study volume. ONRAD offers both and says in its own copy that a service including final reports is often the most cost-effective choice. AstraRad has no preliminary tier at any hour: every study at every priority returns as a final signed report with the reading subspecialist's credentials on it. Our page on STAT, preliminary, and final reads maps where each report type is clinically right, and the arithmetic of the overread sits in the hidden cost of a preliminary overread.

If you are evaluating a STAT alternative, get the final share in writing as a percentage of your STAT volume, and get it by modality. A vendor that signs finals on plain film and returns preliminaries on overnight CT has solved nothing for the tier that generated your complaint.

How fast should a critical result reach the ordering clinician?

Fast enough that the finding still changes what happens to the patient, which is a clinical standard before it is a contractual one. The ACR Practice Parameter for Communication of Diagnostic Imaging Findings, revised in 2025, handles this as nonroutine communication and treats it as a duty distinct from delivering the report itself. It sets an expectation of direct, documented contact with the treating clinician. It does not set a universal number of minutes.

That gap is yours to close in the contract. Ask every vendor for four commitments in writing: minutes from signature to verbal contact, whether the interpreting radiologist makes the call or an operations coordinator relays a message, who owns escalation when the first attempt fails to reach a human, and what gets recorded on the report. Then require the time, the recipient's name, and the method of contact to appear on the signed report itself, so the documentation exists without anyone maintaining a separate log.

The mechanism matters as much as the number. Ask how many handoffs sit between the radiologist who read the study and the phone. A central operations desk can be efficient at order management; a radiologist who dials the ED directly closes the loop in one step and can answer the follow-up question. Either way, get the path in writing. Our detailed treatment of critical results communication covers both the documentation pattern and the contract language for reaching the signing radiologist.

One more thing to specify: what happens on a critical finding in a study that was never ordered STAT. Incidental critical findings turn up in routine work, and a vendor whose escalation pathway only exists inside the STAT queue will handle them at routine speed. Ask how a suspected critical finding is escalated regardless of the priority the study arrived with.

What the incumbents do better than a challenger

Scale buys things a subspecialty practice will not replicate, and pretending otherwise wastes your time. A national network gives you one contract covering facilities in many states, one credentialing and licensing pipeline, and overnight staffing density built so that emergent protocols do not queue behind other work. If your STAT problem is raw capacity at 3am across a dozen sites, that density is the fix and a smaller panel is a risk.

vRad publishes specific emergent protocol performance figures, and they come with an AI story the company explains in public: its AI page states 27 AI models developed by vRad to target the most commonly missed findings and those with the greatest impact on patient care, alongside 6.7 million studies read annually, checked 10 August 2026. AstraRad performs no AI pre-read and no AI triage, and uses no client imaging to train any model: turnaround comes from fellowship-trained subspecialists on scheduled shifts, every read performed inside the United States, with a physician signing every report. If algorithmic triage is what you are shopping for, buy it from someone who builds it.

StatRad's certification stack is genuinely deep and genuinely hard to replicate, including ISO certification and FDA clearance as a registered medical device manufacturer for its in-house built PACS. AstraRad holds no SOC 2 report, no ISO 27001 certification, no HITRUST certification, and no Joint Commission accreditation, and does not claim any. We operate as a business associate under a signed BAA, built to the HIPAA Security Rule safeguard categories, DICOM conformant on intake and HL7 or FHIR on delivery. If your security review scores vendors on certificates, say so early and weight it honestly, because that column is one we lose.

ONRAD sells hospital radiology management alongside reading, which matters if you need a physical presence for fluoroscopy supervision, image-guided procedures, or interventional coverage. Remote reading cannot supply a body in the building. And if your incumbent bills payers directly for the interpretation, replacing them changes your revenue cycle as well as your worklist, which is a bigger project than a vendor swap and should be priced as one.

Run a STAT-only pilot for 30 days

Thirty days of routing real STAT volume to a second vendor settles the question better than any comparison page, this one included. Start with your exclusivity clause and your own counsel, because many contracts commit a minimum volume or a defined service line and leave overflow, a single modality, or a single facility open. Then pick the slice where your incumbent is weakest and where your complaint log already has evidence.

Instrument both sides identically or the pilot proves nothing:

  1. Fix the clock. Measure from last-image arrival to radiologist signature for both vendors, using your own PACS and RIS timestamps, so neither vendor's internal definition decides the result.
  2. Record median and 90th percentile separately. Report them by modality and by hour block, because the 2am number is the one you are buying.
  3. Count post-delivery work. Log every study that needed an in-house interpretation, an addendum, or a clarifying call after delivery. This is the column where preliminary models lose.
  4. Time three unannounced callbacks per vendor. Nights and weekends, from an ED physician, timed to a physician voice on the line.
  5. Reconcile the invoice against the quote in week four. Check the priority multiplier applied to each STAT line, and check for anything charged that was never quoted, which is the pattern our page on teleradiology hidden fees documents.

At the end you hold medians, percentiles, callback times, and reconciliation counts for both vendors on your own case mix. That is a defensible recommendation for your committee, and it is leverage in the renewal conversation even if you decide to stay.

If you want AstraRad in the pilot, tell us your STAT case mix and you will have a complete written rate card back within one business day, with the multiplier for each STAT speed printed on it. The commercial model is per signed report with no minimums, no subscriptions, no platform fee, no per-seat charge, and no onboarding or integration fee, month to month with 30 days notice; the full per-report pricing model is published. For the operational detail on how the tier is staffed, see STAT radiology reads and the modality-level page on STAT CT reads, and read the published SLA methodology before you compare our terms with anyone else's.

Questions, answered

Frequently asked questions

What is the best teleradiology alternative for STAT reads?

The best alternative is whichever vendor will put five numbers in writing: a median STAT turnaround in minutes with a named clock start event, a 90th percentile on that same clock, a trailing compliance percentage against a published tier, the share of STAT studies returned as final signed reports, and a committed time to verbal contact on a critical finding. Almost nobody publishes all five, so the shortlist is usually decided by who will commit to them contractually. Ask for the five in your written request and cut every vendor that answers with an adjective. Speed claims without a clock are unfalsifiable, and unfalsifiable claims cannot be enforced when service slips.

How do I test a STAT teleradiology vendor before switching?

Run a STAT-only pilot for 30 days on a defined slice of volume, after your counsel has read your exclusivity clause. Route one facility, one modality, or overflow above your committed volume. Instrument both vendors identically: measure from last-image arrival to radiologist signature, log median and 90th percentile separately, and count every study that needed in-house work after delivery. Place three unannounced callbacks per vendor on nights and weekends and time them to a physician voice. Compare invoices against quotes in the final week. Thirty days of your own worklist data beats any reference call, because it measures your case mix on your clock at your hours.

Which teleradiology company is fastest for STAT CT?

Published material cannot settle it, because the published numbers are measured differently. Checked on 10 August 2026, vRad publishes stroke protocol turnaround under 7 minutes and trauma under 12 minutes on average without stating a clock start. USARAD publishes 20 minutes or less for STAT cases on its homepage and 30 to 60 minutes for hospital ER cases on its services page. On the StatRad, ONRAD and Real Radiology teleradiology pages linked in this article, we did not find a numeric emergency turnaround figure. A protocol average on an unnamed clock and a tier commitment with a compliance percentage are different claims, so compare the tier you are buying.

Does a STAT read have to be a final signed report?

No, and that is the distinction worth pricing. A preliminary read is a non-final interpretation your ED can act on immediately; someone at your facility still produces the report of record the next morning. A final signed report closes the study and nobody interprets it again. Vendors differ: vRad publishes that finals account for over 80% of its study volume, ONRAD publishes prelims and finals as buyer options, and StatRad publishes both. AstraRad signs a final report on every study at every tier including overnight, so there is no reconciliation queue to staff at 8am.

How fast should a critical result reach the ordering clinician after a STAT read?

Fast enough that the treating clinician can still act on it, which the ACR Practice Parameter for Communication of Diagnostic Imaging Findings treats as a nonroutine communication obligation separate from delivery of the report itself. The parameter does not set a universal clock in minutes, so your contract has to. Ask three questions and get the answers into the signature draft: how many minutes from signature to verbal contact, whether the interpreting radiologist makes the call or a coordinator relays it, and who owns escalation when the first attempt fails to connect. Then require the time, the recipient, and the method on the report.

Can I switch only my STAT volume to a new teleradiology vendor?

Often yes. Many teleradiology contracts commit a minimum volume or exclusivity for a defined service line, which leaves room to route a single modality, a single facility, or overflow above your committed volume elsewhere. STAT is the usual first move because it is the smallest share of volume carrying the largest share of clinical risk and complaint traffic. Where exclusivity is total, the workable test is a shadow read on studies your incumbent has already returned, compared blind. Ask your own counsel before the first study moves, and price your notice period before you price the alternative.

Put a radiologist's name on your next read.

Tell us your modalities and monthly volume. A complete per-report rate card, with turnaround tiers and SLA terms in writing, lands in your inbox within one business day.